The Unofficial Speak Out Wireless Canada Consumer Page - Topic: iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/ Simple:Press Version 5.7.5.3 Victoria_guy on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p32305 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p32305 I managed to get it working.

I reset the network settings under Settings, General, Reset, Reset Network Settings.

It seemed to start accessing the cell data network after I did this.

]]> Sun, 06 Mar 2016 19:28:46 -0800 Victoria_guy on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p32302 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p32302 So far I've had no luck getting my iPhone 5 working for data on Speakout. I moved my SIM from my MotoE to my unlocked iPhone (was on Rogers). I tried unlockit.co.nz, downloaded and installed the APN, but no data.

It's getting late. I'll try again tomorrow.

]]> Fri, 26 Feb 2016 23:12:27 -0800 Dukkha on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p32289 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p32289 Thank you guys!!! I just upgraded from a 4s to a 5s and the data would not work on the 5s. I tried unlockit.co.nz and now my data is back to normal.

]]> Wed, 27 Jan 2016 17:39:57 -0800 v_vexed on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31788 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31788

questioner said

Just in case anyone is wondering, I just successfully enabled data on my iPhone 6 using the following settings:

In the iPhone Config Utility:
1. Under General - Identifier: mms.gprs.rogers.com
2. Under APN or Advanced - APN: rogers-core-appl1.apn
3. Under APN or Advanced - Proxy Server - mmsproxy.rogers.com
4. Under APN or Advanced - Proxy Port - 80

Then I simply plugged in my phone and installed it. It didn't work at first but I restarted my phone and the 3G signal came on!

Just to let everyone know, I was able to work my iphone 5s locked to rogers with a speakout sim.

]]> Thu, 01 Jan 2015 20:22:42 -0800 questioner on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31761 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31761 Just in case anyone is wondering, I just successfully enabled data on my iPhone 6 using the following settings:

In the iPhone Config Utility:
1. Under General - Identifier: mms.gprs.rogers.com
2. Under APN or Advanced - APN: rogers-core-appl1.apn
3. Under APN or Advanced - Proxy Server - mmsproxy.rogers.com
4. Under APN or Advanced - Proxy Port - 80

Then I simply plugged in my phone and installed it. It didn't work at first but I restarted my phone and the 3G signal came on!

]]> Wed, 03 Dec 2014 21:41:05 -0800 v_vexed on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31700 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31700 Hello, can someone please tell me whether or not speakout works with the iPhone 5s? I would really like to upgrade my phone. And if it does work, does the data still work and the mms and the iMessage?

]]> Mon, 27 Oct 2014 19:14:25 -0700 doug c on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31577 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31577 A wiki answer to MMS, via Google.ca;

http://en.wikipedia.org/wiki/M.....ng_Service

nite

]]> Tue, 26 Aug 2014 23:10:18 -0700 RGM on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31576 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31576 bridonca said:
Those settings should work with any device that can MMS and or use a internet connection.

For my clarification, what does MMS stand for?
Thx

]]> Tue, 26 Aug 2014 21:48:04 -0700 bridonca on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31574 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31574 RGM said:

A question , really not about a cellphone but a wireless access point. Am I right in thinking that these settings are not exclusive to a cellphone and can be used for any other device?

From a previous post.

“In order to access the new SpeakOut data plans, program your device with the following settings:

APN: rogers-core-appl1.apn

MMSC: http://mms.gprs.rogers.com

MMS Proxy: mmsproxy.rogers.com

MMS Port: 80

APN Type: Default

APN Protocol: IPv4/IPv6

APN Roaming Protocol: IPV4/IPv6

Those settings should work with any device that can MMS and or use a internet connection.

]]> Tue, 26 Aug 2014 10:44:30 -0700 RGM on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31569 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31569 A question , really not about a cellphone but a wireless access point. Am I right in thinking that these settings are not exclusive to a cellphone and can be used for any other device?

From a previous post.

“In order to access the new SpeakOut data plans, program your device with the following settings:

APN: rogers-core-appl1.apn

MMSC: http://mms.gprs.rogers.com

MMS Proxy: mmsproxy.rogers.com

MMS Port: 80

APN Type: Default

APN Protocol: IPv4/IPv6

APN Roaming Protocol: IPV4/IPv6

]]> Tue, 26 Aug 2014 06:51:42 -0700 agarn on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31567 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31567 Anyone able to get mms text messaging working on iphone. Have 5c and 3g and neither will send or receive mms texts

]]> Sat, 23 Aug 2014 11:48:58 -0700 harvey on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31328 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31328 Unlockit.co.nz failed on my iPhone 3G. It says "Profile failed to install. The UUID pr the profile "APN carrier settings" is not unique."

Any idea what that means? Am I out of luck on my old phone?

APN: Rogers-core-appl1.apn

Oh, it means I must delete the old Speakout APN, then have the website install the new. And restart iPhone (hold both buttons down until it powers off). Working now, still slow.

]]> Sat, 10 May 2014 21:55:16 -0700 rrraven on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31317 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31317 I used to have UMB working on my iphone 4, but when they switched to the new data I cancelled. Decided to give it a try and was not having success with the various settings described here. http://www.unlockit.co.nz/ worked for me!

]]> Sat, 03 May 2014 15:25:30 -0700 Jon2010 on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31193 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/page-2/#p31193 I've done it this with a 4s and a 5 on Petro : I just visit unlockit.co.nz and create an APN certificate using "speakout" choose accept and done. Worked every time.

]]> Sat, 15 Mar 2014 07:09:32 -0700 michael on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p31192 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p31192 I've spent countless hours trying to get this to work on iPhone 4. Thanks for this thread, I finally got data to work!

Just a recap for other Speakout Customers with an iPhone:

-Install "Apple Configurator" on Mac OSX Mavericks (I'm sure windows is similar):
-Create a profile for APN with the settings:
APN: internet.com
User Name: 'left blank'
Password: wap
Proxy Server: 'left blank'
Port: 'left blank'

Plug in your phone and follow the on-screen instructions.
I didn't even need to reboot my phone, it worked immediately!

SPEEDTEST:
Server: Beanfield Metroconnect.
Ping: 89ms
DL: 1.88 Mbps
UL: 1.11 Mbps

Server: Nexicom Inc.
Ping: 73ms
DL: 3.62 Mbps
UL: 1.06 Mbps

]]> Fri, 14 Mar 2014 11:34:23 -0700 Pete7383 on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30473 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30473 i8gnocchi,

I shared your struggles in trying to get the new data to work – loaded and reloaded numerous configuration profiles and doing the reset network thing. I too could not get the iPhone to pick up the APN automatically so am also confused on how others were so "lucky".

Someone posted this on rfd but note they are using a Android:
2. The reason I was having problems connecting is that SO's APN settings as posted on their website are incorrect, at least for my phone (a rooted Galaxy Nexus.) When I switched to Data and rebooted my phone I got a new Robbers APN, rogers-core-appl1.apn, automatically. That one worked for me. The APN settings I had been trying are the ones SO posts on their site in their FAQ. They are slightly different and don't work for me. In particular SO's APN specifies an MMS Proxy of mmsproxy.rogers.com rather than Robbers' 10.128.1.69. For some reason the former doesn't work for me but the explicit IP address does.

I'm not gonna bother to try it and will stick with the internet.com apn since it's working. Would be interesting to know if there's a speed difference depending on which APN you're using…

]]> Thu, 24 Oct 2013 07:57:54 -0700 i8gnocchi on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30471 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30471 Pete7383,

I vaguely recall finding those settings in some Rogers forum I stumbled upon during my hours of hunting for a solution. I figured I'd try the settings that were posted considering I had absolutely no luck with any other setup I tried. Similar to your experience they worked for me.

During my struggle to get the 'open' data to work I even called customer service and asked them what the specific profile setting for an Iphone is considering on the website the company advertises that the service and an Iphone are compatible. I was told to use the settings as detailed on the website - I said they don't work or I'm not entering them correctly – the response back to me was they DO work and use them as they are - I said walk me through the steps please – the response back was you have all you need per the website info. This back and forth went on for a few minutes until I gave up.

I am still puzzled why some people are stating they are getting the data to work without a profile setting after resetting and popping their sim out and back in. Tried this with no success.

]]> Thu, 24 Oct 2013 04:31:51 -0700 Pete7383 on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30464 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30464 I'm specifically asking i8gnocchi where he found THESE settings:

APN: internet.com
User Name: 'left blank'
Password: wap
Proxy Server: 'left blank'
Port: 'left blank'

They worked for me while the ones from the speakout website did not.

]]> Tue, 22 Oct 2013 16:23:38 -0700 andreww on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30463 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30463 From the speakout support site

“In order to access the new SpeakOut data plans, program your device with the following settings:

APN: rogers-core-appl1.apn

MMSC: http://mms.gprs.rogers.com

MMS Proxy: mmsproxy.rogers.com

MMS Port: 80

APN Type: Default

APN Protocol: IPv4/IPv6

APN Roaming Protocol: IPV4/IPv6

]]> Tue, 22 Oct 2013 13:34:30 -0700 Pete7383 on iPhone settings for the new data service? https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30462 Phone/Device Issues and Features https://www.speakoutwireless.ca/speak/phone-features/iphone-settings-for-the-new-data-service/#p30462 i8gnocchi said:

Just an update - I did load the following via the Iphone config. utility, completed a hard reset and had success:

APN: internet.com
User Name: 'left blank'
Password: wap
Proxy Server: 'left blank'
Port: 'left blank'

I had no luck with any other setup I found posted in the forums.

Thanks for these setttings, they worked for me on an iPhone 5. Tried the rogers-core-appl1.apn so many times with no luck. Also tried having the phone pick up the apn didn't work.
Curious as to where you found these settings?

]]> Tue, 22 Oct 2013 06:52:51 -0700